ADD-A-STEP® modular ladders were designed for the access entry market and are approved for use in potable water, waste water, highly corrosive and general construction applications. The ADD-A-STEP® modular ladder system was designed to provide a product that could be supplied off the shelf for immediate delivery. ADD-A-STEP® is manufactured from different types of engineering polymers depending on the application. ADD-A-STEP® modular ladders are now a leader in the access entry market.
The Benefits
What are the benefits of using an ADD-A-STEP® modular ladder you ask? Please keep reading.
It is modular and can be transported over long distances more economically than fully assembled ladders.
It does not have to be measured prior to order and can be made up to any length on site as required.
The ADD-A-STEP® ladder packs can be transported in a lift or by crane and assembled at the top or at the foot of a structure.
There is no maintenance required other than occasional cleaning with a pressure hose if desired.
The ADD-A-STEP® ladder has excellent insulation properties properties so it can be used in applications where electrical cables are present.
The blue ladder is suitable for contact with drinking.
The fibre reinforced plastic materials used are UV tolerant and non-corrosive.
Contractors amd Water Authorities will have major benefits regarding OH&S issues particulary weight. At approx. 5Kg per meter the ladder is significantly lighter than steel or stainless steel.
The Add-A-Step® package
The ADD-A-STEP® modular ladder system was designed to provide a product that could be supplied off the shelf for next day delivery.
ADD-A-STEP® is manufactured from different types of engineering polymers. Each module of the ADD-A-STEP® ladder consists of two stiles, one rung and two retaining clips. Each stile measures 360mm long, 80mm wide and 32mm thick maximum dimension. The ladder width outside the stiles (uprights) is 435mm and it weighs approximately 5kg per lineal metre.
The ADD-A-STEP® ladder has 30mm diameter rungs 300mm centre spacing and the width or foot space inside the stiles is 375mm. The ladder is assembled on site using the number of modules required to acheive any length equipment.
Each ladder box measures 425mm long x 360mm wide x 190mm high and contains three metres of ladder and three bracket sets. Any number of modules can be purchased.
The ADD-A-STEP® modular ladder system offers supply off the shelf for a next day delivery.
Two bracket types
1. Pipe Bracket
2. Square Bracket
Installation
The ADD-A-STEP® Modular Ladder system has been designed in such a way that assembly and installation is a quick and very simple process.
Ladder Types
Sewerage - Yellow
Coloured yellow and recommended for use in chemically aggressive locations such as sewer man holes.
Portable water - Blue
Coloured blue and recommended for use with portable water emmersion situations such as water towers and tanks.
Building & Construction - Black
Coloured black and recommended for use in building and construction, particulary where the ladder is exposed to ultra-violet light.
A Fully Tested Alternative To Steel
Potential users need to know about the ADD-A-STEP® ladder enables to meet stringent performance criteria, and production of the ladder modules is quality-controlled.
Industrial Steps & Ladders is a Quality Assured Supplier. The quality manual and procedures are audited annually and certified by Bereau Veritas Australia.
AS⁄NSZ ISO 9001:2000
WSAA Appraisal
The product Appraisal 08/09 is available on the WSAA website or from Industrial Steps & Ladders. Complies with Australia Standards AS1657-1992 and AS4198-1994 and European Standard EN13101-2002.
Download Our Brochure
This brochure describes the range of ADD-A-STEP® ladders and their very practical benefits in potable water, waste water, corrosive and general industrial and construction applications.
Download our PDF brochureDownload assembly instructions
Looking for a hard-copy version of the assembly instructions? You can download it by clicking the link below.
Download our PDF assembly instructions